Mariner 4 (together with Mariner 3 known as Mariner-Mars 1964) was the fourth in a series of spacecraft intended for planetary exploration in a flyby mode. It was designed to conduct closeup scientific observations of Mars and to transmit these observations to Earth. Launched on November 28, 1964,[2] Mariner 4 performed the first successful flyby of the planet Mars, returning the first close-up pictures of the Martian surface. It captured the first images of another planet ever returned from deep space; their depiction of a cratered, dead planet largely changed the scientific community's view of life on Mars.[3][4] Other mission objectives were to perform field and particle measurements in interplanetary space in the vicinity of Mars and to provide experience in and knowledge of the engineering capabilities for interplanetary flights of long duration. Initially expected to remain in space for eight months, Mariner 4's mission lasted about three years in solar orbit.[5] On December 21, 1967, communications with Mariner 4 were terminated.

Mariner 4

Mission type	Mars flyby
Operator	NASA / JPL
COSPAR ID	1964-077A
SATCAT no.	942
Mission duration	3 years, 23 days
Distance travelled	112,000,000 kilometres (70,000,000 mi)
Spacecraft properties
Spacecraft type	US-K KOBALT_A12
Manufacturer	Jet Propulsion Laboratory
Launch mass	260.8 kilograms (575 lb)
Power	310 watts (at Mars encounter)
Start of mission
Launch date	November 28, 1964, 14:22:01 (1964-11-28UTC14:22:01Z) UTC
Rocket	Atlas LV-3 Agena-D
Launch site	Cape Canaveral LC-12
End of mission
Last contact	December 21, 1967
Orbital parameters
Reference system	Heliocentric
Semi-major axis	199,591,220 kilometers (124,020,230 mi)
Eccentricity	0.17322[1]
Perihelion altitude	166,052,670 kilometers (103,180,350 mi)[1]
Aphelion altitude	234,867,290 kilometers (145,939,770 mi)[1]
Inclination	2.544 degrees[1]
Period	567.11 days[1]
Epoch	July 14, 1965, 21:00:57 UTC[1]
Flyby of Mars
Closest approach	July 15, 1965, 01:00:57 UTC
Distance	9,846 kilometers (6,118 miles)
Instruments
Cosmic dust detector Cosmic ray telescope Geiger counter/ionization chamber Helium magnetometer Solar plasma probe Trapped radiation detector TV camera
Mariner ← Mariner 3 Mariner 5 →

Spacecraft and Subsystems

The Mariner 4 spacecraft consisted of an octagonal magnesium frame, 127 cm (50 in) across a diagonal and 45.7 cm (18.0 in) high. Four solar panels were attached to the top of the frame with an end-to-end span of 6.88 meters (22.6 ft), including solar pressure vanes which extended from the ends. A 104.1 cm × 66.0 cm (41.0 in × 26.0 in) elliptical high-gain parabolic antenna was mounted at the top of the frame as well. An omnidirectional low-gain antenna was mounted on a 223.5 cm (7 ft 4.0 in) tall mast next to the high-gain antenna. The overall height of the spacecraft was 2.89 metres (9.5 ft). The octagonal frame housed the electronic equipment, cabling, midcourse propulsion system, and attitude control gas supplies and regulators.[6]

The scientific instruments included:[7][8][9]

• A helium magnetometer, mounted on the waveguide leading to the omnidirectional antenna, to measure the magnitude and other characteristics of the interplanetary and planetary magnetic fields.
• An ionization chamber/Geiger counter, mounted on the waveguide leading to the omnidirectional antenna nearer the body of the spacecraft, to measure the charged-particle intensity and distribution in interplanetary space and in the vicinity of Mars.
• A trapped radiation detector, mounted on the body with counter-axes pointing 70° and 135° from the solar direction, to measure the intensity and direction of low-energy particles.
• A cosmic ray telescope, mounted inside the body pointing in anti-solar direction, to measure the direction and energy spectrum of protons and alpha particles.
• A solar plasma probe, mounted on the body pointing 10° from the solar direction, to measure the very low energy charged particle flux from the Sun.
• A cosmic dust detector, mounted on the body with microphone plate approximately perpendicular to the plane of orbit, to measure the momentum, distribution, density, and direction of cosmic dust.
• A television camera, mounted on a scan platform at the bottom center of the spacecraft, to obtain closeup pictures of the surface of Mars. This subsystem consisted of 4 parts, a Cassegrain telescope with a 1.05° by 1.05° field of view, a shutter and red/green filter assembly with 0.08 and 0.20 second exposure times, a slow scan vidicon tube which translated the optical image into an electrical video signal, and the electronic systems required to convert the analogue signal into a digital bitstream for transmission.[10]

The electric power for the instruments and the radio transmitter of Mariner 4 was supplied by 28,224 solar cells contained in the four 176 cm × 90 cm (69 in × 35 in) solar panels, which could provide 310 watts at the distance of Mars. A rechargeable 1200 W·h silver-zinc battery was also used for maneuvers and backup. Monopropellant hydrazine was used for propulsion, via a four-jet vane vector control motor, with 222-newton (50 lbf) thrust, installed on one of the sides of the octagonal structure. The space probe's attitude control was provided by 12 cold nitrogen gas jets mounted on the ends of the solar panels and three gyros. Solar pressure vanes, each with an area of 0.65 m² (7.0 sq ft), were attached to the tips of the solar panels. Positional information was provided by four Sun sensors, and a sensor for either the Earth, Mars, or the star Canopus, depending on the time in its spaceflight. Mariner 4 was the first space probe that needed a star for a navigational reference object, since earlier missions, which remained near either the Earth, the Moon, or the planet Venus, had sighted onto either the bright face of the home planet or the brightly lit target. During this flight, both the Earth and Mars would be too dim to lock onto. Another bright source at a wide angle away from the Sun was needed and Canopus filled this requirement.[7] Subsequently, Canopus was used as a reference point in many following missions.[11]

The telecommunications equipment on Mariner 4 consisted of dual S-band transmitters (with either a seven-watt triode cavity amplifier or a ten watt traveling-wave tube amplifier) and a single radio receiver which together could send and receive data via the low- and high-gain antennas at 8⅓ or 33⅓ bits per second. Data could also be stored onto a magnetic tape recorder with a capacity of 5.24 million bits for later transmission. All electronic operations were controlled by a command subsystem which could process any of 29 direct command words or three quantitative word commands for mid-course maneuvers. The central computer and sequencer operated stored time-sequence commands using a 38.4 kHz synchronization frequency as a time reference. Temperature control was achieved through the use of adjustable louvers mounted on six of the electronics assemblies, plus multilayer insulating blankets, polished aluminum shields, and surface treatments. Other measurements that could be made included:

• Radio occultation
• Celestial mechanics based on precision tracking

Mariner 4 was also supposed to carry an ultraviolet photometer on the left side of the aft TV Camera scan platform. Late in testing, it was discovered that the inclusion of the UV photometer produced electrical problems that would have jeopardized the TV Camera. As a result, it was removed and replaced with a thermal/inertial mass simulator that was designed to emulate the UV photometer's geometry, mass, and other characteristics so that any unintentional problems caused by the removal of the UV photometer would be negated. This spare UV photometer was eventually flown on Mariner 5 in 1967.[12]

Mission Profile

Launch

This section needs additional citations for verification. (July 2019)

After Mariner 3 was a total loss due to failure of the payload shroud to jettison, JPL engineers suggested that there had been a malfunction caused during separation of the metal fairing exterior from the fiberglass inner lining due to pressure differences between the inner and outer part of the shroud and that this could have caused the spring-loaded separation mechanism to become tangled and fail to detach properly.^{[citation needed]}

Testing at JPL confirmed this failure mode and an effort was made to develop a new, all-metal fairing. The downside of this was that the new fairing would be significantly heavier and reduce the Atlas-Agena's lift capacity. Convair and Lockheed-Martin had to make several performance enhancements to the booster to wring more power out of it. Despite fears that the work could not be completed before the 1964 Mars window closed, the new shroud was ready by November.[13]

After launch from Cape Canaveral Air Force Station Launch Complex 12,[14] the protective shroud covering Mariner 4 was jettisoned and the Agena-D/Mariner 4 combination separated from the Atlas-D booster at 14:27:23 UTC on November 28, 1964. The Agena's first burn took place from 14:28:14 to 14:30:38. The initial burn put the spacecraft into an Earth parking orbit and the second burn from 15:02:53 to 15:04:28 injected the craft into a Mars transfer orbit. Mariner 4 separated from the Agena at 15:07:09 and began cruise mode operations. The solar panels deployed and the scan platform was unlatched at 15:15:00. Sun acquisition occurred 16 minutes later.[15]

Lock on Canopus

After Sun acquisition, the Canopus star tracker went searching for Canopus. The star tracker was set to respond to any object more than one-eighth as, and less than eight times as bright as Canopus. Including Canopus, there were seven such objects visible to the sensor. It took more than a day of "star-hopping" to find Canopus, as the sensor locked on to other stars instead:[7] a stray light pattern from the near Earth, Alderamin, Regulus, Naos, and Gamma Velorum were acquired before Canopus.[3][11]

A consistent problem that plagued the spacecraft during the early portion of its mission was that roll error signal transients would occur frequently and on occasion would cause loss of the Canopus star lock. The first attempt at a midcourse maneuver was aborted by a loss of lock shortly after the gyros began spinup. Canopus lock was lost six times within a period of less than three weeks after launch and each time a sequence of radio commands would be required to reacquire the star. After a study of the problem, the investigators concluded that the behavior was due to small dust particles that were being released from the spacecraft by some means and were drifting through the star sensor field-of-view. Sunlight scattered from the particles then appeared as illumination equivalent to that from a bright star. This would cause a roll error transient as the object passed through the field-of-view while the sensor was locked onto Canopus. When the object was bright enough that it exceeded the high gate limits at eight times the Canopus intensity, the spacecraft would automatically disacquire Canopus and initiate a roll search for a new star. Finally, a radio command was sent on December 17, 1964, that removed the high gate limit. There was no further loss of Canopus lock, although roll transients occurred 38 more times before encounter with Mars.[7][11]

Midcourse Maneuver

The 7½ month flight of Mariner 4 involved one midcourse maneuver on December 5, 1964. The maneuver was initially scheduled for December 4, but due to a loss of lock with Canopus, it was postponed. The maneuver was successfully completed on December 5; it consisted of a negative pitch turn of 39.16 degrees, a positive roll turn of 156.08 degrees, and a thrusting time of 20.07 seconds. The turns aimed the motor of the spacecraft back in the general direction of Earth, as the motor was initially pointed along the direction of flight. Both the pitch and roll changes were completed with better than 1% accuracy, the velocity change with about 2.5% accuracy. After the maneuver, Mariner 4 was on course for Mars as planned.[7]

Data Transmission Rate Reduced

On January 5, 1965, 36 days after launch and 10,261,173 km (6,375,997 mi) from Earth, Mariner 4 reduced its rate of transmission of scientific data from 33 1/3 to 8 1/2 bits per second. This was the first autonomous action the spacecraft had taken since the midcourse maneuver.[16]

Mars Flyby

The Mariner 4 spacecraft flew by Mars on July 14 and 15, 1965. Its closest approach was 9,846 km (6,118 mi) from the Martian surface at 01:00:57 UT July 15, 1965 (8:00:57 p.m. EST July 14), its distance to Earth was 216 million kilometres (134 million miles), its speed was 7 km/s (4.3 mi/s) relative to Mars, 1.7 km/s (1.1 mi/s) relative to Earth.[17]

Planetary science mode was turned on at 15:41:49 UT on July 14. The camera sequence started at 00:18:36 UT on July 15 (7:18:49 p.m. EST on July 14) and 21 pictures using alternate red and green filters, plus 21 lines of a 22nd picture were taken. The images covered a discontinuous swath of Mars starting near 40° N, 170° E, down to about 35° S, 200° E, and then across to the terminator at 50° S, 255° E, representing about 1% of the planet's surface. The images taken during the flyby were stored in the on-board tape recorder. At 02:19:11 UT, Mariner 4 passed behind Mars as seen from Earth and the radio signal ceased. The signal was reacquired at 03:13:04 UT when the spacecraft reappeared. Cruise mode was then re-established. Transmission of the taped images to Earth began about 8.5 hours after signal reacquisition and continued until August 3. All images were transmitted twice to ensure no data was missing or corrupt.[2] Each individual photograph took approximately six hours to be transmitted back to Earth.[18]

The spacecraft performed all programmed activities successfully and returned useful data from launch until 22:05:07 UT on October 1, 1965, when the long distance to Earth (309.2 million kilometres (192.1 million miles)) and the imprecise antenna orientation led to a temporary loss of communication with the spacecraft until 1967.[2]

First Image Hand Drawn

The on-board tape recorder used on Mariner 4 was a spare, not originally intended for the Mariner 4 flight. Between the failure of Mariner 3, the fact that the Mariner 4 recorder was a spare, and some error readings suggesting an issue with the tape-recorder, it was determined that the team would test the camera function definitively. This eventually led to the first digital image being hand-drawn. While waiting for the image data to be computer processed, the team used a pastel set from an art supply store to hand-color (paint-by-numbers style) a numerical printout of the raw pixels. The resulting image provided early verification that the camera was functioning. The hand-drawn image compared favorably with the processed image when it became available.[19]

• 
  The first digital image from Mars hand-colored like a paint-by-numbers picture
• 
  Processed first digital image from Mars

Micrometeoroid Hits and End of Communications

Data acquisition resumed in late 1967. The cosmic dust detector registered 17 hits in a 15-minute span on September 15, part of an apparent micrometeoroid shower that temporarily changed the spacecraft attitude and probably slightly damaged its thermal shield. Later it was speculated that Mariner 4 passed through debris of D/1895 Q1 (D/Swift), and even made a flyby of that comet's possibly shattered nucleus at 20 million kilometres (12 million miles).[20]

On December 7 the gas supply in the attitude control system was exhausted, and between December 10 and 11, a total of 83 micrometeoroid hits were recorded which caused perturbation of the spacecraft's attitude and degradation of the signal strength. On December 21, 1967, communications with Mariner 4 were terminated. The spacecraft is now derelict in an exterior heliocentric orbit.[21][22]

Results

The total data returned by the mission was 5.2 million bits (about 634 kB). All instruments operated successfully with the exception of a part of the ionization chamber, namely the Geiger–Müller tube, which failed in February 1965.[23] In addition, the plasma probe had its performance degraded by a resistor failure on December 8, 1964, but experimenters were able to recalibrate the instrument and still interpret the data.[24] The images returned showed a Moon-like cratered terrain,[25] which scientists did not expect, although amateur astronomer Donald Cyr had predicted craters.[18] Later missions showed that the craters were not typical for Mars, but only for the more ancient region imaged by Mariner 4. A surface atmospheric pressure of 4.1 to 7.0 millibars (410 to 700 Pa) and daytime temperatures of −100 °C (−148 °F) were estimated. No magnetic field[26][27] or Martian radiation belts[28] or, again surprisingly, surface water[18] was detected.

Bruce C. Murray used photographs from Mariner 4 to elucidate Mars' geologic history.[29]

• 
  The first digital image from Mars
• 
  The first close-up image ever taken of Mars. It shows an area about 330 km (210 mi) across by 1,200 km (750 mi) from limb to bottom of frame.
• 
  The clearest Mariner 4 image showing craters
• 
  Mosaic of frames 1 and 2. The Martian atmosphere is visible over the planet's limb.
• 
  Mosaic of frames 9 and 10
• 
  Mosaic of frames 11 and 12

Images of craters and measurements of a thin atmosphere[25][30]—much thinner than expected[18]—indicating a relatively inactive planet exposed to the harshness of space, generally dissipated hopes of finding intelligent life on Mars. Life on Mars had been the subject of speculation and science fiction for centuries.[31] If there was life on Mars, after Mariner 4 most concluded it would probably be smaller, simpler forms.[4] Others concluded that a search for life on Earth at kilometer resolution, using several thousand photographs, did not reveal a sign of life on the vast majority of these photographs; thus, based on the 22 photographs taken by Mariner 4, one could not conclude there was no intelligent life on Mars.[32] The solar wind was measured, and compared with simultaneous records from Mariner 5 which went to Venus.[33]

The total cost of the Mariner 4 mission is estimated at $83.2 million (equivalent to $715 million in 2021).[23] Total research, development, launch, and support costs for the Mariner series of spacecraft (Mariners 1 through 10) was approximately $554 million (equivalent to $4.76 billion in 2021).[2]

See also

Wikimedia Commons has media related to Mariner 4.

• Exploration of Mars
• List of missions to Mars
• Mariner (crater)
• Space exploration
• Space probe
• REX (New Horizons) (Radio occultation for atmosphere data at Pluto in 2015, on New Horizons spacecraft)

References

External links

• Mariner 4 Mission Profile by NASA's Solar System Exploration
• Space Flight Operations Plan Mariner Mars '64 (PDF)
• Processed images and mosaics from the Mariner 4 mission to Mars
• Ted Stryk's Mariner 4 page
• Mariner 4 photos

На других языках

[es] Mariner 4

[ru] Маринер-4